Vsmile HappyZir ST for Full Contour
ST White Zirconia Puck for Full Contour Crown Dental Bridge Dental Milling Machine
Translucent.
High strength.
Vsmile ST Dentak Zirconia Block is a dental zirconium oxide (4Y-TZP) with very high flexural strength (1200 MPa) and medium translucency (41 %).
This combination enables a maximum variety of indications for the fabrication of monolithic and anatomically reduced single-tooth and bridge restorations. The soft material quality of the discs positively affects the lifetime of the milling tools and ensures effortless separation and post-processing. Thanks to these properties, Vsmile ST Zirconia milling disc provides an economic advantage for the users in the laboratory.
Size
Open system | 98*10mm/ 12mm/ 14mm/ 16mm/ 18mm/ 20mm/ 22mm/ 25mm/ 30mm | ||
Zirkonzahn system | 95*10mm/ 12mm/ 14mm/ 16mm/ 18mm/ 20mm/ 22mm/ 25mm/ 30mm | ||
Amann Girrbach system D shape | 71*10mm/ 12mm/ 14mm/ 16mm/ 18mm/ 20mm/ 22mm/ 25mm/30mm | ||
Technical Data
Type | Flexural strength | Translucency | Indications | Processing techniques |
4Y-TZP | 1200 MPa | 41% | Single unit Coping Full Contour Bridge Framework | Infiltration technique Staining technique Cut-back technique |
|
|
|
|
|
Highlights
Natural-Looking | High Strength | High effectiveness |
Natural-Looking Due to the high translucency, Vsmile ST is natural-looking yet highly esthetic. | Very high strength combined with medium translucency | High effectiveness and economic efficiency Maximum variety of indications Optimized material properties for long service life of the milling tools |
|
|
|
CONTACT US
+86 15084896166
Building A4 No.2450, Yuelu West Avenue, Changsha,China
